Introduction:

On earth and in space we are immersed in a sea of electromagnetic waves. An electromagnetic wave is just a fancy phrase physicists use when referring to light.  Electromagnetic waves include gamma rays (very high energy light), x-rays (high energy light), ultraviolet rays (light that gives us tans), visible light (light we can see with our eyes), infrared light (light that we sense as heat), microwaves (light we use in our microwaves), and finally radio waves (light we listen to on the radio and on our cellphones). Almost everything emits, reflects and absorbs electromagnetic waves. For more information on electromagnetic waves see Lab 2.  In this lab we will focus on nebula or clouds of dust and gas found between stars.

If you go outside with a pair of binoculars and look into the constellation of Orion, you will see more than stars.  If you look close enough, binoculars will not suffice here, you will see a cloud of gas and dust.  We call this the Orion Nebula.  The Orion Nebula is made mostly of hydrogen gas. In fact 70% of our observable universe is made of hydrogen gas.  Consequently, the dominant source of radio waves, which we will be observing with Smiley, comes from hydrogen gas.

So how does hydrogen gas emit radio waves? Here’s the science:  A neutral hydrogen atom consists of an proton surrounded by an electron.  One property that both an electron and a proton has is something called spin.  Through a crude analogy, spin can be thought of as a spinning earth orbiting a spinning Sun. The earth spins around its axis  as it orbits the Sun, this is why we have day and night. Also the Sun spins as the earth orbits around it.  If we picture spin as this rotation we can place a direction on spin. If the spin of the earth is up, then the earth is spinning counter clockwise as it orbits the sun. If the spin of the earth is down then it is spinning clockwise as it orbits the sun. The same works for the sun.  When the spins of an electron and proton are in the same direction, meaning they are both spinning in the same direction, then the spins are said to be parallel. When the spins of an electron and a proton are in different directions, meaning they are spinning in different directions, the spins are said to be anti-parallel. When an electron and a proton have parallel spins, the electron is in a slightly higher energy level than when the electron and proton have anti-parallel spins. Nature always prefers to be in the lowest energy possible, so parallel spins usually decay into anti-parallel spins. Some diagrams of parallel and anti-parallel spins can be found below.

Hydrogen atoms in a nebula can collide or absorb light, causing the electron to flip from its natural state of being anti-parallel to the proton to parallel to the spin of the proton.  Since the electron wants to be in its lowest energy level it flips back to anti-parallel.  However when the electron spin-flips it emits a radio electromagnetic wave with wavelength of 21 centimeters and a frequency of 1.42 Gigahertz (1 billion Hertz).  Wavelength is simply the length of a cycle and frequency is the number of cycles per second, see Lab 2 for further discussion on wavelength and frequency..  An electromagnetic wave with a wavelength of 21 cm is much longer than a visible electromagnetic wave (typically visible light has a wavelength of about 550 nanometers which is about 400,000 smaller than our radio electromagnetic wave).

Using Smiley, you will measure 21 cm radio waves from gas and dust that exists between the stars, emitted from the spin flip transitions from hydrogen!

Procedure:

1. Log into the Smiley Observation Room.  For information about how to use Smiley see the Smiley Users Manual.
2. In Map mode select an object by either clicking on the red star or by selecting one by pulling down the Sources tab.
3. Once you have selected your object, click on the GO button. You can follow Smiley’s progress by watching the live video on the upper left hand corner of your screen. NOTE:  Not all objects will be above the horizon.  If the Altitude is negative, then the object is below the horizon and cannot be observed.

4. After Smiley stops check the coordinates.  Are the NEW Coordinates close to the CURRENT Coordinates?  They should be, but we can do better. Use HandPaddle to point Smiley closer to the desired coordinates.
5. Next click on the Spectrum button, to set Smiley in spectrum mode.
6. In the Spectrum window, set your IF GAIN to around 19 and set your PLOT RATE to 1x.  Also make sure the Base Frequency is set to 1.42 GHz.. 
7. After Smiley has completed the plot and starts to plot again click on Stop Scan.  Record the peak intensity on the table below by clicking on Save Scan and saving it to some Output filename .  Next open your saved scan by clicking on Open Data File.  Then click on List, this will list all of your data points. 
8. Now find your peak intensity and record your results in the table below.
9. Repeat steps 2-7 for four more objects.

Questions:

1. How did your spectrum scans compare from object to object?
2. What could account for the difference?